Remotely Awakening Computers
Administrators can remotely turn on or awaken computers in the branch via the gateway using the WoL (Wake on LAN) command. This is useful, for example, when there is a need to release a software update.
The command wakes up a single device.
1 In the Configuration tab, select System > Network.
2 In the Network area, click Diagnostics.
3 In the Network Diagnostics window, select Wake as the diagnostic tool.
4 Enter the device's MAC address.
5 Click Go.
6 An OK message is displayed when the device is awakened.
7 Click Close.
