Installing a SATA Hard Drive in the CTERA C200
Note: Remove hard drives prior to shipping the CTERA C200. Shipping the appliance with the hard drives inserted may result in hardware damage.
To install a SATA hard drive:
1 Open the C200's back cover, by pressing the two plastic tabs and then pulling backwards.
Two slots are revealed.
2 Insert the SATA hard drive into a vacant slot, pressing it firmly until it is all the way in.
If you install the drive in left-hand slot, the drive's metal cover should be facing left.
If you install the drive in the right-hand slot, the drive's metal cover should be facing right.
3 Close the C200's back cover, by inserting first the bottom of the cover, pressing the tabs, and then pushing forwards.
The cover should click into place.
