Managing Network Settings : Enabling/Disabling Link Aggregation
  
Enabling/Disabling Link Aggregation
IEEE 802.3ad dynamic link aggregation (also called port trunking) is supported by the CTERA C400 and C800. Link aggregation enables you to use both Ethernet ports of the cloud storage gateway in parallel in order to increase the link speed beyond the limits of a single 1Gbps port and to increase redundancy for higher availability.
To enable link aggregation:
1 Connect both of the CTERA C400 or C800's LAN ports to a switch that supports IEEE 802.3ad dynamic link aggregation.
2 In the Configuration tab, select System > Network.
3 Slide the Link Aggregation lever to the ON position.
To disable link aggregation, slide the lever to the OFF position.