The C400 Specification and Installation : Installing the CTERA C400
  
Installing the CTERA C400
To install the CTERA C400:
1 Install at least one hard drive in the C400.
See Installing a SATA Hard Drive in the CTERA C400.
2 Connect one end of the Ethernet cable to the LAN0 port, and connect the other end to your Ethernet LAN switch or hub.
3 Connect the provided power supply cable to the AC power input socket, and connect the other end to the wall outlet.
4 Turn the power switch at the back of the C400 to the ON position.
The C400 will start up, and the Power LED will turn green.
The C400 automatically obtains an IP address using DHCP.
Note: If a DHCP server is not available, then after one minute, the C400 will use the IP address 192.168.192.5.
Warning: If you need to unplug the C400, you must first shut it down as described in Shutting Down the CTERA Cloud Storage Gateway. Failure to do so could result in data loss.