Element | Description |
Power button | A button used for turning the C200 on and off. |
Power jack | A power jack used for supplying power to the C200. Connect the power supply cable provided in the C200 package to this jack. |
Reset | A button used for restarting the C200 or resetting it to its default settings. For information, see Restarting the CTERA Cloud Storage Gateway and Resetting the CTERA Cloud Storage Gateway to Its Default Settings. |
USB | Two USB 2.0 ports used for connecting USB drives. Note that you can connect more than two USB drives, by connecting a powered USB hub. Be sure to use a powered hub, in order to avoid exceeding the power capacity of the USB ports. |
LAN | An Ethernet port used for connecting the C200 to your Ethernet LAN switch or router. Connect the Ethernet cable provided in the C200 package to this port. For best performance, use a Gigabit-capable Ethernet switch. |
Back cover | The back cover opens to allow insertion of up to two SATA 3.5" hard drives. |
Fan grille | Do not cover or obstruct the fan grille as it is needed for proper cooling of your cloud storage gateway. |
USB Eject 1 / USB Eject 2 | Buttons used to eject the USB drives. Each button ejects the USB drive connected to the port that is adjacent to the button. After ejecting a USB drive, wait until the USB LED turns off. You can then safely remove the USB drive from the system. |
LED | State | Explanation |
Ready/Status | Short red blink, followed by a green blink | The cloud storage gateway is starting up. |
On (Green) | The cloud storage gateway is operational. | |
Heartbeat (Red) | The cloud storage gateway is rebooting. | |
LAN | On | A link has been established for the LAN port. |
Blinking | Data is being transmitted or received. | |
Cloud | On | The cloud storage gateway is connected to the CTERA Portal. |
Blinking slowly | The cloud storage gateway is resolving the CTERA Portal address. | |
Blinking fast | The cloud storage gateway is connecting to the CTERA Portal. | |
Off | The cloud storage gateway is disconnected from the CTERA Portal. | |
USB 1 /2 | On | A USB storage device is attached. |
Off | No USB storage device is attached, or the USB storage device has been successfully ejected and may be unplugged. | |
Disk Fail | On | An array has failed. |
Blinking fast | A disk has failed. | |
Blinking slowly | An array is degraded. | |
Heartbeat | A disk is unhealthy. | |
Off | There are no disk failures. | |
Disk 1 / 2 | On (Green) | A disk is installed in the SATA bay. |
Blinking (Green) | The disk is in use. | |
On (Orange) | The disk format is unrecognized. The disk should be formatted. |